- The ISIS track drafting machine LZ 033 is a result of a systematic analysis of costs. For the reason there has been obtained a remarkable relation between price and performance. Quality was not neglected.
- stable special aluminium profile, anodized horizontal and vertical 36x80 mm
- attachment of the horizontal track to the drafting board by quick mount assembly by means of clamp on brackets or by durable finished screw on brackets on request, justifiale for boards of 17 to 28 mm in thickness, attachment brackets adjustable
- varnished pattern stripes for fixing of reference sheets by means of magnetiv clips
- die casting carriages (horizontal and vertical) with 27 mm in diameter rollers respectively with V-shaped profile surfaces
- vertical alignment unit, detachable
- double joint for purpose of a good facing on the drafting board
- counterblanace by internal sliding weight
- brake (horizontal and vertical) acts about eccenter lever, self-centering, if arrested, no loading of the rollers
- parking space 24 cm (length of board minus over-run = range of drawing)
- lamp journal for small go with it drafting lamp Ø 9,5/15 mm
- The best selling version LZ 005 for professional application is fitted out in this case with the drafting head 033.
- stable special aluminium profile, anodized horizonal 41x93 mm, vertical 35x80 mm
- attachment of the horizontal track to the drafting board by means of durable furnished screw on brackets (as standard)
- quick mount assembly with clamp on brackets (by request)
- justifiable for boards of 17 to 28 mm in thickness, attachement brackets
adjustable - varnished pattern stripes for fixing of reference sheets by means of magnetic clips
- horizontal die casting carriages with four 36/24 in diameter rollers each
for running and supporting, dust separator - vertical die casting carriage with four 27 mm in diameter rollers for
V-shaped slot - vertical alignment unit, detachable
- double joint for purpose of a god facing on the drafting board
- counterbalance by internal scliding weight
- self-centring brakes horizontal (toggle lever), vertical (eccentric lever)
acting without loading of the rollers - lamp journal for small go with it drafting lamp, diameter 9,5/15 mm
- user-friendly optimum dimensions of handle knob
- protactor disc with a large pitch circle diameter, widepitched division and a clearly arranged scale by 2x 180+deg; -reading
- zero point postion obviously analogous to the coordinate system
- 10-minutes vernier for main and basic pitch scale, 5-minutes reading by interpolation
- base line adjustment by rotating and arresting of the protactor disc
- optical surveying of the switch mechanism, notched index disc and catch hardened and grounded
- possible adjustment of the center line secured by a screw fastener
 - user-friendly optimum dimensions of handle knob
- gripping edge; 77mm
gripping through; 60 mm
gripping height; 42 mm - protacto disk with a lange pitch circle diameter (112 mm), wide-pitched division and a clearly arranged scale by 2x 180+deg; -reading (360+deg; and 400 gon available)
- zero point position obviously analogous to the coordinate system
- A10+deg;-vernier on the main scale and on the scale for the base line adjustment enable 5'-readings by interpolation
- double-function lever for angualr adjustment, free wheeling and 15+deg;-arresting fixing of the angualr adjustment with clamping lever (with seesaw by request)
- base line adjustment (BY type), standard construction (NO type) with seperate bearing, operation and pitch (2x 60 +deg;), two angular stops
& optical surveying of the switch mechanism, notched index disc and catch hardened and grounded - stell made scale rule mounting plate with kurled nut and clamping screw, rotatable in sintered bronze bearing
- fine adjustment micrometer scre with safety screw for possible adjustment of the center line
|
|
